Motor Pump running in dry condition will burn the motor pump and thus it will stop after a very short time.
Our product LIDER Water Dry Run Guard / Water Level Guard prevents the motor pump from dry running and thus subsequent burnout.
This product is no longer in stock
* Many a time, it happens that, water in the bore well/well aquifer discharge is less than motor pump discharge, and the water coming out of the motor pump is not continuous.
* The motor pump which is submerged in water will give water till it is having sufficient water in bore-well. In case of insufficient water (when water level goes down), then the motor pump runs without giving water which is called dry running of motor pump.
* Motor Pump running in dry condition will burn the motor pump and thus it will stop after a very short time.
* Our product LIDER Water Dry Run Guard / Water Level Guard prevents the motor pump from dry running and thus subsequent burnout.
* When water in the bore-well falls below a set level (set by our sensing probe) often installed above the motor pump, a signal is sent initiating a trigger.
* Thus LIDER Water Dry Run Guard / Water Level Guard will switch OFF the motor pump AUTOMATICALLY as per set level position of sensing probe.
Our products are ideally suitable for water supply in houses, bungalows, offices, hospitals, factories, hotels & restaurants, apartments, multistory buildings, commercial centers and all places where motor pumps are installed in bore-well /wells.
* Small device, Saves Water, Electricity and Time.
* Auto and Manual switch provided for bypass condition also.
* Easy to install in all kinds of deep borewells/wells.
* LED Indicator for water full (green) & water empty (red).
* NO maintenance required. Solid state PCB inside.
* Prevents the motor pump from burnout.
* Product directly going from Manufacturer to Consumer
|Dimensions (L X B X H)mm||10.2 x 3.5 x 8.1|
|Horsepower (HP)||any HP rating pumps|
|Relay Output (amps)||5 amps 240 VAC [R]|
|TYPE||Water Management Product|
|Connection Diagram||Connection diagram provided with Nuts and Screws.|
|MATERIAL||ABS Electrical Grade Plastic Molded|
|Quality Control||Govt. C.P.R.I. Bhopal Tested and Certified|
|Packing Box||3 layer Corrugated.|
|Warranty||Six months against any manufacturing defect.|
No customer reviews for the moment.