Water Dryrun Timer (WDT-WC1)

LWDT-WC1

Motor Pump running in dry condition will burn the motor pump and thus it will stop after a very short time. Our product LIDER Water Dry Run Timer prevents the motor pump from dry running and thus subsequent burnout.

More details

Rs. 1,680

Product Description

  • Many a time, it happens that, water in the bore well/well aquifer discharge is less than motor pump discharge, and the water coming out of the motor pump is not continuous.
  • The motor pump which is submerged in water will give water till it is having sufficient water in bore-well. In case of insufficient  water (when water level goes down), then the motor pump runs without giving water which is called dry running of motor  pump.
  • Motor Pump running in dry condition will burn the motor pump and thus it will stop after a very short time. Our product LIDER Water Dry Run Timer prevents the motor pump from dry running and thus subsequent burnout.
  • LIDER Water Dry Run Timer can be set at predetermined time anywhere between 1-60 minutes. Calculate the time taken to by the motor pump when it runs smoothly with sufficient water coming out of the motor pump, and set the LIDER Water Dry Run Timer just ahead of the time taken by motor pump to discharge less than actual water from bore-well (insufficient water coming out ).
  • For example if the motor pump runs smoothly with sufficient water in bore-well for 25 minutes and after that the motor pump discharge is less than actual then set the LIDER Water Dry Run Timer at approx 20 minutes which will switch OFF the pump set AUTOMATICALLY thus preventing the Motor Pump from Dry Running and subsequent burnout.
  • Thus LIDER Water Dry-Run Timer switches OFF the motor pump AUTOMATICALLY as per set time.

APPLICATION

All Single Phase Motor Pumps without Contactor Control Panel including Monoblock/Openwell pumps etc.

Our products are ideally suitable for water supply in houses, bungalows, offices, hospitals, factories, hotels & restaurants, apartments, multistory buildings,commercial centers etc  and all places where motor pumps are installed in bore-well /wells.

Please raise your query through email- liderelectricinfo@gmail.com or call at our helpline no 0761-2757173.

ADVANTAGES

  • Small device, Saves Water, Electricity and Time.
  • Auto and Manual switch provided for bypass condition.
  • Easy to install as no wires required for sensor probes.
  • NO maintenance required. Solid state PCB inside.
  • NO sensors required.
  • NO extra cost of wires required to connect the pump control panel to tank.
  • Prevents the motor pump from burnout.
  • Product directly going from Manufacturer to Consumer.

Product Features

ColourGREY
Dimensions (L X B X H)mm177mm*170mm*90mm
Weight (gms)1500
Voltage (volts)220~240 VAC, 50 Hz
Horsepower (HP)any HP rating pumps
Relay Output (amps)5 amps 240 VAC [R]
Connection DiagramConnection diagram provided with Nuts and Screws.
MountingWall mounting /Screw type.
MATERIALPowder coated sheet metal
Quality ControlGovt. C.P.R.I. Bhopal Tested and Certified
Packing Box3 layer Corrugated
WarrantySix months against any manufacturing defect.

Download Brochure with Connection Diagrams

Product Reviews

Grade 
09/23/2015

Designed as per today's requirements

Nice product I am very happy to get this product

    Write a review

    Water Dryrun Timer (WDT-WC1)

    Water Dryrun Timer (WDT-WC1)

    Motor Pump running in dry condition will burn the motor pump and thus it will stop after a very short time. Our product LIDER Water Dry Run Timer prevents the motor pump from dry running and thus subsequent burnout.

    6 other products in the same category: